MIL-STD-878B
1. SCOPE
1.1 Scope. This standard establishes the procedures for dimensioning and determining clearance for aircraft tires and rims.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified section 4 of this standard. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in section 4 of this standard, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-5041 Tires, Pneumatic, Aircraft
MIL-PRF- 7726 Repair and Retreading of Used Pneumatic Tires and Repair of Inner Tubes
(Copies of these documents are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-4095 or https://assist.daps.dla.mil/online/start/.
2.3 Order of Precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. DEFINITIONS (N/A)
4. GENERAL REQUIREMENTS
4.1 Proportions and clearances. The proportions and clearances of aircraft wheels and tires shall be in accordance with Figure 1. Figure 1 is based upon the following considerations:
1
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business